The following is an edited version of the speech delivered by Acting Executive Director of the St. Kitts & Nevis Bureau of Standards (SKNBS), Mr. Hiram Williams at the Opening of the 31st Meeting of the Council of CROSQ, held at the Marriott Resort, Frigate Bay, St. Kitts & Nevis on Thursday, October 5, 2017.
"Being part of the global market, the Government of St. Kitts and Nevis is signatory to trade agreements such as the Technical Barriers to Trade (TBT) Agreement, implemented within the World Trade Organisation (WTO), for which the Bureau of Standards is designated as the Enquiry Point. Under the TBT agreement, states parties are obligated to base their national technical regulations on international standards and to participate in conformity assessments systems.
The World Trade Organization Agreement on Technical Barriers to Trade (WTO/TBT) recognises the importance and the role of international standards and conformity assessment systems in improving efficiency in production and facilitating global trade. The process of developing National Standards requires significant technical and financial resources. Member States have to use the limited technical and financial resources well.
Developing and effectively implementing standards is not only a lengthy exercise but also costly. A lot of people from these organizations take personal loans to cover such costly expenses! It is important that we make good use of these limited resources to develop our Quality Infrastructure as it relates to Standardisation, Metrology, Certification, Accreditation and Conformity Assessment. Our membership in CROSQ provides us with access to standards developed and harmonised through the coordinated effort of the organisation's Technical Management Committee (TMC). Hence, the Government will continue to support the Bureau’s participation in our own regional organisation CARICOM Organisation for Standards and Quality (CROSQ), and also support our strategic alliance with International Organisations such as the International Organisation for Standardisation (ISO), the Inter-American Metrology System (SIM), Codex Alimentarius (the world’s most recognised food standards body), Pan-American Standards Commission (COPANT), International Electrotechnical Commission (IEC) and ASTM International.
The SKNBS is happy to participate in CROSQ's programme to harmonise regional standards and promote their awareness to improve competiveness and facilitate regional and international trade. In this regard, we commend CROSQ for developing a regional standardisation strategy and also for assisting the Member States in developing their own National Standardisation Strategies.
We are pleased with our partnership with CROSQ and the other Member States as we work together as a region to influence the content of International Standards. And indeed, this was demonstrated recently under the SKNBS's project – “Enhancing the National Quality Infrastructure of ST. Kitts and Nevis”, where we received valuable technical assistance from CROSQ in providing the Technical Officer for Standards from the Secretariat and the Chief Technical Officer for Standards at the Barbados National Standards Institute (BNSI), Mr St. Prix and Mr Scott respectively, to assist us in the implementation of the National Standardisation Strategy. Similarly, we are grateful to the Bureau of Standards Jamaica (BSJ) and Trinidad and Tobago Bureau of Standards (TTBS) for facilitating training attachments for SKNBS technical staff.
Standards and Conformity Assessment procedures are critical and essential to our national quality infrastructure as it relates to health and safety, industry and commerce and to the nation's economic performance. It is estimated that about 80% of global trade in goods and services is affected by standards and technical regulations based on standards. For this and other economic reasons, it is essential for countries to develop and implement national standardisation strategies that will facilitate the development and adoption of standards to meet market needs and requirements to effectively compete and trade globally.
Our membership in regional and international organisations permits us to influence the development and content of regional and international standards and conformity assessment programmes that enhance our position in the global marketplace.
So in addition to our involvement in CROSQ and being the enquiry point for the WTO - TBT agreement, the Bureau is also:
- Contact point for Codex Alimentarius, the leading international food standard organisation,
- one of the contact points for International Food Safety Authorities Network (INFOSAN),
- focal point for the Stockholm Convention that deals with the reduction and eventual elimination of persistent organic pollutants, and also,
- the focal point for the Minamata Convention.
And I am pleased to inform you that on the advice of the Bureau of Standards, the Government of St. Kitts and Nevis ratified the Minamata convention in May 2017. The Minamata Convention on Mercury is a global treaty to protect human health and the environment from the adverse effects of mercury.
In keeping with the Bureau’s responsibilities and the Federation's obligations under international trade agreements, such as the Economic Partnership Agreement (EPA), the Bureau has embarked on the development of training programmes and projects specifically geared towards building our Quality Infrastructure. And, as mentioned earlier, we requested and received technical assistance from CROSQ for development and implementation of a process to adopt and develop standards according to best practices. One of the main outcomes was the establishment of six (6) technical committees to address issues and matters that are relevant and important to the Federation. The committees established were:
- National Committee on Environmental Management;
- Committee on Labelling;
- Committee on Tourism and Related Services;
- National Committee on Codex, to deal with Food Safety and Standards;
- National Committee on Information and Communication Technology, and
- The Energy, Electrical and Mechanical Technical Committee
And these six committees are in addition to the existing National Committee of Conformity Assessment Bodies, which is chaired by Dr Marcus Natta, SKNBS’ Science and Research Manager, who is also the National Accreditation Focal Point and presently in Geneva attending one of ISO's - Committee on Conformity Assessment (CASCO) working group meetings.
Another programme that the SKNBS benefited from was also supported by CDB under the 10th EDF standby facility project “Enhancing the National Quality infrastructure of St. Kitts and Nevis”. This project provided assistance to the Bureau (SKNBS) to undertake development plans to ensure accuracy and reliability of its test results. Hence a major milestone in this plan is to be accredited to ISO/IEC 17025 standard and upgrade and acquiring key pieces of equipment. During the last 12 months, the SKNBS staff has worked extremely hard in developing and receiving training for the implementation of a Quality Management System as per the requirements of ISO/IEC 17025. And as I said, our aim is to be accredited by 2018 starting with selected microbiology tests.
I want to take this opportunity to commend the CEO and staff of CROSQ, particularly over the last year where there has been a drive with success to develop and establish new partnerships and cooperation with relevant regional and international organisations of interest to Member States. We have to adapt to a changing world and this type of partnership and cooperation will help CROSQ to demonstrate and establish itself as a significant and relevant regional standards organisation that can prepare Member States to have an impact on the content of international standards.
Therefore, on behalf of the Minister and the Ministry of International trade, Industry, Commerce and Consumer Affairs, we express our appreciation for having the opportunity to host the 31st Council of CROSQ meeting and Energy Awareness Seminar and wish that we have a fruitful and successful two days of deliberations.
Efforts are being made to equip the Caribbean’s measurement scientists (metrologists) with training skills to assist industry in addressing their calibration needs as well as their counterparts in National Metrology Institutes (NMIs) across the Region.
Eighteen such metrologists, practitioners in the science of measurement, from a number of National Standards Bureaux in the CARICOM Region, are in Barbados this week to participate in a Training of Trainers workshop at the Divi Southwinds Hotel, St. Lawrence Main Road, Christ Church.
At the weeklong workshop, which opened on Monday, July 24 and ends Friday, July 28, 2017, Finance Manager with the CARICOM Regional Organisation for Standards and Quality (CROSQ), Mr. Mohan Nandwani underscored how important the event was to aid in the facilitation of regional trade.
“When we talk about quality, we are not just talking about science, we are talking about developing the financial infrastructure of the Caribbean; trade – that is what it is really all about. Quality will drive the trade that the Caribbean does and it is only through these kinds of workshops and so on that we can build that quality which will eventually feed itself into public and private sector development, and trade is the key here. This is what we are aiming towards,” said Mr. Nandwani on behalf of CROSQ.
The Training of Trainers workshop was facilitated by CROSQ, but funded by the German Federal Government through the “Capacity Building in Technical and Scientific Organisations Using Regional Knowledge and Experience” Project, more commonly called CABUREK and the Regional Renewable Energy and Energy Efficiency Project, known as the R3E Project. Both projects are initiatives of the German National Metrology Institute (PTB).
About this collaboration, Mr. Nandwani said: “This CABUREK project has been organised into three working groups of which the Working Group 2 is tasked with developing a regional training programme in metrology for industry. In addition to developing the curriculum and content for this training course, the Working Group aims to create a group of trainers that are qualified to offer training in mass metrology, temperature metrology, volume metrology and the estimation of measurement uncertainty.”
Calibration is the comparison of a measurement device with an established standard. Businesses of all types need this service to ensure that their measurement devices such as scales, thermometers and other meters are giving accurate readings. Their staff also need to know how to use these measurement devices correctly and how to do their own internal calibrations. This workshop aims to address these training needs of industry and other quality management professionals.
PTB Consultant, Mrs. Anett Matbadal explained a bit more about what CABUREK was and why it was important to the Caribbean and industry.
“The current CABUREK Programme runs from March 2016 to March 2018, so we are pretty much over half of this; and the idea is working with and learning from your peers. You are all representatives of NMIs and you all basically do the same jobs. CABUREK is implemented in Latin America and the Caribbean, so it is just logical to learn from one another.
“Some [of you] are a bit ahead in the development; some are still to find themselves, so it is good to sit together, work together in groups on specific topics, to learn from others, experience the good and bad lessons learnt. That is why this is a pretty interesting concept and you are here working within this programme,” said Mrs. Matbadal.
While Working Group 2 of CABUREK is tasked with Developing a Regional Training Offer, the PTB consultant said that overall the idea is to strengthen the capabilities of the human resource in metrology within the Caribbean.
“We start in the Caribbean . . . and that is the idea, [that this training can] be extended to other regions – Latin America or even beyond that. We started with developing a regional training offer, and you will understand that the basis for a good training offer is a good trainers’ pool, who is capable, well-trained, and our idea is that these trainers use standardised training material. So the idea is to develop certain training courses that the Caribbean needs, using standardised training material. It can be organised in every country, every region. It is targeting primarily, the industrial sector, private sector, public sector, but not the NMI itself,” said Mrs. Matbadal.
The training is being conducted by Mrs. Silvana Demicheli of the National Metrology Institute of Uruguay (LATU), with Mrs. Matbadal and CROSQ’s Technical Officer, Metrology, Mr. David Tomlinson, providing support, as part of the CABUREK group of trainers.
Metrology is the science of measurement and in the Caribbean region, most NMIs are located within the National Standards Bureaux.
Energy conservation and implementation of an Energy Efficiency Building Code are critical to mitigate the impacts of climate change which pose great risks to countries, like St. Vincent and the Grenadines, within the Caribbean.
This was the sentiment was expressed by the Permanent Secretary in the Ministry of Foreign Affairs, Trade and Commerce in St. Vincent and Grenadines, Mrs. Sandy Peters-Phillips, on Monday, 24 July 2017, when she addressed the opening of the Second Meeting of the Regional Project Team (RPT) for the Development of the CARICOM Energy Efficiency Building Code. The Meeting was held in Kingstown, St. Vincent over two days, 24-25 July 2017, and according to Dr. Devon Gardner, Programme Manager for Energy within the CARICOM Secretariat, signaled the “collective intent of CARICOM to act in a collaborative and cohesive manner to give life an Energy Efficiency Building Code for the region”.
Dr. the Honourable, Ralph Gonsalves, Prime Minister of St. Vincent and the Grenadines, who made an appearance at the technical meeting session, provided critical insight into a number of key issues, especially the legal requirements and socioeconomic considerations at national levels, of which the RPT should be mindful. He indicated that the inclusive approach that was being pursued, with regards to the EEBC development, could contribute toward a balancing of the technical options, which were being considered by the experts, with the national realities and provide to an easier path for country adoption.
At this, the Second Meeting, the RPT reached consensus on a Draft Caribbean Application Document (CAD), just four months after the first meeting was convened in Kingston, Jamaica. The meeting also resulted in the endorsement of a programme of work for the effective, efficient and timely completion of the Regional EEBC.
The RPT, which comprises energy efficiency and standards development experts nominated by National Bureaus of Standards from across the Region, was formally launched in March 2017 with the mandate to review and determine an optimal approach for adapting and developing, an appropriate code for consideration as the Energy Efficiency Building Code (EEBC) for CARICOM.
The first meeting had approved the use of the International Energy Conservation Code 2018 (IECC 2018) as the reference code for the Regional EEBC. Since, a Draft CAD was developed, through a cooperation between the CARICOM Secretariat and the CARICOM Regional Organization for Standards and Quality (CROSQ), and reviewed by Committees established within the Member States that engaged key stakeholders. The revised draft of the CAD will now be open to the general public in Member States for validation.
The EEBC, which will address all aspects of energy use in buildings, is expected to reduce the dependency on imported fossil fuels within the Region by reducing buildings’ energy consumption. Furthermore, it can substantially contribute to compliance with domestic targets for sustainable energy use and global commitments for greenhouse gas (GHG) emissions reduction.
The development of the CARICOM EEBC is being supported by the Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH, through the Renewable Energy and Energy Efficiency Technical Assistance (REETA) Programme, as well as the Global Environment Facility (GEF), through the Energy for Sustainable Development (ESD) in Caribbean Buildings Project.
The 10th European Development Fund (EDF) Technical Barriers to Trade (TBT) Programme has been deemed a success by its partners and stakeholders.
Concluded at the end of March 2017, the programme whose aim was to enhance the services of Quality Infrastructure within CARIFORUM countries to facilitate the smoother operations of trade, was centred around the development and equivalence of standards among Member States; development of metrology (science of measurement) services; the accreditation of laboratories and the development and implementation of testing, inspection and certification bodies and services, as well as the boost of awareness and information sharing.
The programme was managed by the German National Metrology Institute (PTB) and implemented by the CARICOM Regional Organisation for Standards and Quality (CROSQ) and the Dominican Institute for Quality (INDOCAL) in the Dominican Republic.
Project Coordinator with CROSQ, Ms. Karlene Russell noted that it was a very successful implementation at a rate, as of mid-March, approaching 90 per cent completion.
“The main elements of the TBT Programme included capacity building in all areas of Quality Infrastructure. We also looked at international recognition of national and regional quality institutions, as well as regional harmonisation and equivalency, specifically related to standards development, and of course the promotion of a quality culture in the region.
“To date we have achieved 70 per cent of our performance indicators and another 20 per cent is about 50 per cent completed. So we are looking at significant progress being made in about 90 per cent of our performance indicators. And as far as the implementation of regional programmes go, that is a very very good result and we are very pleased with the success,” said the project coordinator.
The performance indicators are the benchmarks set in the project to gauge effectiveness and achievement of the objectives set within the overall project, as well as more specific areas.
The project was a 7.8 Million Euro undertaking, of which about 95 per cent had been spent up to mid-March, which was also concomitant with the technical implementation, added Ms. Russell.
These comments underscored those of Chairman of CROSQ, Mr. Jose Trejo at two separate events in March, the Close-Out Seminar in Antigua and Barbuda, and then a regional press conference held via video conferencing systems and linking a majority of the Member States and Germany.
Mr. Trejo noted that he was exceptionally pleased with the progress and results of the project, and over the coming years, CROSQ would aim to strengthen the platforms set.
“During the next few years, CROSQ will focus on strengthening Quality Infrastructure in the Services sector and creative industries. We will also seek to implement programmes that foster greater utilisation of national QI services by the private sector, public sector & academia. Programmes geared towards international accreditation of conformity assessment bodies – such as testing laboratories, inspection bodies and certification agencies, will be continued in earnest.
“As we pursue our regional development agenda we acknowledge that the CARICOM region is seen as attractive for investment and recognised for our competitive advantage in niche products. Therefore as we continue to develop these markets, quality must remain at the centre in order to advance Caribbean Competiveness,” said the Chairman.
In offering congratulations, PTB’s Head of Technical Cooperation for Latin America and the Caribbean, Mr. Ulff Hillner noted, “It was in many respects a very rewarding experience for us as a National Metrology Institute. It was the first time the European Union directly entrusted and awarded us as a national organisation to execute this kind of project so we have been able to gain a lot of experience along the way.
“It was rewarding because a team was built in the process that spanned the region that included the CROSQ Secretariat and staff, the National Standards Bodies in CARICOM and the Dominican Republic, so in that way it was a novel and innovative approach which proved to be quite successful. . . I think the achievements speak for themselves,” said Mr. Hillner.
Among notable highlights of the project were:
• The development of a Regional Quality Policy that is now set to go before CARICOM’s Council on Trade and Economic Development for approval;
• The creation of a Five-Year Regional Standards Development Priority Plan, which was the first of its kind in the world to provide the Caribbean with a forward scope for the development of Standards. It has already gained the attention of the International Organisation for Standardization (ISO);
• The ISO9001 certifications in Belize, Jamaica and Suriname.
• The creation of the Caribbean Cooperation for Accreditation (CCA) Scheme that coordinates regional experts in assisting laboratories and other bodies seeking accreditation, at reasonable rates;
• Equivalence of standards with five commodities between CARICOM and the Dominican Republic – to ensure the standards set at both trading ends were similar;
• The establishment of two Caribbean Reference Laboratories (CaRLs) in volume and temperature;
• Experts trained in mass and temperature in labs within the Region; and the provision of measurement equipment in all CARIFORUM countries;
• Awareness-raising about accreditation at the national level;
• Accreditation of five regional laboratories and one certification body utilising the Caribbean Cooperation for Accreditation (CCA) Scheme; as well as testing laboratories in Guyana, Jamaica, Suriname and Belize, and an inspection body in Trinidad and Tobago which are on the way to accreditation.
• CROSQ’s observer status on the World Trade Organisation’s TBT Committee;
• The production of a series of videos about the development of Regional Quality Infrastructure in the Caribbean, which are now available in 17 countries, including the Dominican Republic and Germany.
by Jewel Fraser of Inter Press Service News Agency
Caribbean Community (CARICOM) states are in the process of formulating an energy efficiency building code for the region that would help reduce CO2 emissions, but implementation of the code may depend heavily on moral suasion for its success.
Fulgence St. Prix, technical officer for standards at CARICOM Regional Organisation for Standards and Quality (CROSQ) who is overseeing the Regional Energy Efficiency Building Code (REEBC), told IPS, “When we at the regional level propose a standard or code it’s meant to be voluntary…We do not have the mechanism to dictate to member states to make any standard the subject of a technical regulation thus making implementation mandatory.”
In keeping with WTO guidelines, he said, “A standard is a voluntary document. You cannot force any member state to implement any one standard.” The decision as to whether to implement the REEBC, therefore, rests with member states.
The REEBC project was officially launched at a meeting in Jamaica at the end of March. This followed consultations over several months by a Regional Project Team comprising representatives from some of the Caricom member states, as well as regional architects, engineers, builders and electricians, on the need for a minimum energy efficiency building standard for the region.
It was unanimously agreed that it was imperative one be established and the decision was taken to base the REEBC on the 2018 version of the International Energy Conservation Code that will be published in July of this year.
“The goal is to have a document that would reduce the CO2 footprint on the average,” said St. Prix, adding that climate change is just one of the considerations driving the REEBC initiative. “If we could develop that code and have it effectively implemented, we could realise at least a 25 per cent reduction of CO2 emissions, but this is just an estimate.”
The Intergovernmental Panel on Climate Change (IPCC) chapter on Buildings in its Fifth Assessment Report states that in 2010 buildings accounted for 32 per cent of total global final energy use, 19 per cent of energy-related greenhouse gas (GHG) emissions (including electricity-related), and approximately one-third of black carbon emissions.
GHG emissions in Latin America and the Caribbean from buildings were said to have grown to 0.28GtCO2eq/yr (280,000,000 tonnes of CO2 equivalents of GHG emissions) in 2010.
The report also states, “final energy use may stay constant or even decline by mid-century, as compared to today’s levels, if today’s cost-effective best practices and technologies are broadly diffused.”
However, the IPCC’s report suggests that moral suasion may not be the most effective means of achieving the implementation of energy efficiency standards. It notes, “Building codes and appliance standards with strong energy efficiency requirements that are well enforced, tightened over time, and made appropriate to local climate and other conditions have been among the most environmentally and cost-effective.”
Trinidadian architect Jo-Ann Murrell, managing director of Carisoul Architecture Co. Ltd., a firm that specialises in green architecture, said effective implementation of a regional energy efficiency building code may have to wait until the region’s younger generation become the decision makers with regard to home purchases.
“We have a younger generation who will be older at that time, who will be interested in investing in energy efficiency. They are interested in the sustainability of the climate,” she said.
She said that the subsidised cost of electricity in Trinidad and Tobago is 3 cents US per kWh. So, “there is not a desire on the part of clients, due to the cost factor, for using alternative sources of energy or using energy saving devices. So when we tell clients they can achieve energy savings if they use certain building methods, they will choose the energy efficient air conditioning unit, they will use LED lights, and so on, but [not always] when it comes to other options,” Murrell said.
She stressed, “We have very competent architects in Trinidad and Tobago and the architects are quite knowledgeable in terms of sustainable design. What we do not have are clients who are willing to do the financial outlay to incorporate sustainability.”
St. Prix also cited economic challenges for Caricom states wishing to implement the REEBC. “You know that member states are at very different stages of their development. Any building code is a challenge. The major challenge is human resources and [the need for] economic resources to be able to employ the needed personnel to implement the code.”
The IPCC report also cites transaction costs, inadequate access to financing, and subsidised energy as among the barriers to effective uptake of energy efficient technologies in building globally.
The IPCC report goes on to state, “Traditional large appliances, such as refrigerators and washing machines, are still responsible for most household electricity consumption…albeit with a falling share related to the equipment for information technology and communications (including home entertainment) accounting in most countries for 20 % or more of residential electricity consumption.”
For this reason, CROSQ is also undertaking a regional energy labelling scheme for appliances sold in the region. Though common in European countries, they are not standard practice throughout the Caribbean. The scheme, said Janice Hilaire, project coordinator for the Renewable Energy and Energy Efficiency Project (R3E), is being funded by the German government.
“We also want to develop standards for PVC panels and water heaters,” she added.
Hilaire said the R3E would be training people to carry out the testing for this scheme at select labs in the region that has a limited amount of equipment for carrying out the tests.
“We are setting up an intense information and awareness campaign because we want to bring about a change in behaviour. We want householders to understand why they must adopt certain practices. We also want to bring about a more efficient use of energy.in the region which will positively affect GDP. The REEBC cannot operate in a vacuum. It must be complemented by other initiatives,” she said.
The REEBC and the associated R3E are in their early stages, St. Prix pointed out. As these projects are rolled out, CROSQ will begin collecting data that shows the actual dollar savings the region enjoys through these initiatives. The CROSQ team will then be able “to go to our policy makers and say, if you make this mandatory you will be saving this amount.” Member states would be urged to put legal mechanisms in place, St. Prix said.
(This article was originally published by the Inter Press Service News Agency)
Standards for solar water heaters and a number of energy-related appliances are coming to the Caribbean.
And key to this development will be policymakers, standards and energy experts who will meet in Barbados from May 17th to 19th, 2017, for a major workshop on energy standards and policy analysis, at the Divi Southwinds Resort, St. Lawrence Main Road, Christ Church.
The experts and policymakers will be exposed to a Policy Analysis Modelling System (PAMS), designed by the Collaborative Labelling and Appliance Standards Program (CLASP) and the Lawrence Berkeley National Laboratory (LBNL) which was developed “to help local policymakers assess the benefit of standards and labelling programmes”.
The one-day policy analysis workshop, which falls on the first day of the three-day training, discussion and planning forum on energy efficiency standards and labelling standards, is being held as part of CARICOM Regional Organisation for Standards and Quality (CROSQ)-implemented Renewable Energy and Energy Efficiency (R3E) Project.
The R3E Project focuses on developing standards for the energy sector in the region, namely energy efficiency and renewable energy standards, with supporting infrastructure for energy efficiency testing of appliances – namely, room air-conditioners, refrigerators and freezers, and lights – along with the development of standards for solar PVC panels and solar water heaters in the region. It is funded by a 1 Million Euro investment from the German Government, and is partnered by the German National Metrology Institute (PTB) and the Dominican Republic’s National Standards Body, INDOCAL.
CROSQ’s Technical Officer - Standards, Mr. Fulgence St. Prix explained that at the PAMS workshop, CLASP officials would explain how to estimate potential savings from implementing energy efficiency policies in the region.
“We talk a lot in the Caribbean about energy efficiency and introduction of renewable energies, but there isn’t that understanding at the national levels sometimes about how this actually benefits the countries in terms of dollars and cents. This is what this workshop is aimed at helping policymakers more effectively do.
“We are in the process of developing Energy Efficiency Building Codes for the region and this factor of savings will be a crucial one to getting Member States in the Caribbean to understand how it benefits their economies at the end of the day. So that’s what we aim to do through this workshop, and using actual case studies to further solidify our position,” said St. Prix.
He noted that this was but one day of what would be happening this week when energy, policy and standards experts from across the Region and Germany, gathered in Barbados.
“On the second day of the workshop, energy experts will sit together and plan a Road Map to determine the steps to the development and implementation of a labelling scheme for refrigerators, lighting and room air conditioners. And the following day we will sit as a group to determine which standard will be used from the several examples we’ve been studying over recent months, and plan our next steps in the development of the standards for labelling of energy efficient appliances,” he further explained.
Deciding on the approach and right standards to use as the basis for the regional approach which will then be adopted by CARICOM Member States, is a crucial part of the process for the development of the energy efficiency and renewable energy standards.
About The R3E Project
The Renewable Energy and Energy Efficiency (R3E) Project is primarily based on the premise that the introduction of standards, testing and other quality-related services into the RE and EE subsectors, could result in significant changes to the way energy is viewed and the focus paid by policymakers, retailers, general public and other vital stakeholders in these areas.
Its main components are the development of standards for RE appliances – namely solar water heaters; development of standards for photovoltaic systems; regional energy performance standards for EE appliances – namely refrigerators, air conditioners and lighting; as well as an efficiency labelling scheme for the stated appliances. It also aims to establish centres for testing of these appliances in the region, and other supporting quality systems.
The aims of this project are:
· Support of regional standardisation activities for this sector, and use of these activities for the creation of binding directives and technical regulations.
· Establishment of technical expertise for testing and measurement services in individual countries.
· Awareness-raising, informational and public relations activities, as well as dialogue with persons in decision-making and other key positions.
IIt is funded to the tune of 1 million Euros from the German Government; managed by the German Metrology Institute (PTB) and implemented by the CARICOM Regional Organisaiton for Standards and Quality (CROSQ) and the Dominican Institute for Quality (INDOCAL) in the Dominican Republic.
The Caribbean Agricultural Health and Food Safety Agency (CAHFSA) has been monitoring the issue relating to the sale of unwholesome meat and meat products originating from Brazil.
Several Member States have already instituted measures to restrict the importation of some or all meat products from Brazil. It is noted that China, the European Union, and Chile have also instituted restrictive measures.
The United States Department of Agriculture (USDA) has redoubled its food inspection efforts on beef products from Brazil although none of the slaughtering or processing facilities implicated in the Brazilian scandal shipped meat products to the U.S. The Department said it is still conducting "additional pathogen testing” of all shipments of raw beef and ready-to-eat products from Brazil.
CAHFSA is endeavoring to obtain more information as it relates to the specific plants and products involved and will disseminate same as soon as possible.
We are kindly requesting Member States that are conducting tests of the various products, to share the results with the other Chief Veterinary Officers (CVOs)/Member States who may not be in a position to complete the testing protocols. This is in an effort to assist in the decision-making process regarding the continuance of the measures that would have been taken.
We would also like to advise that Members of the Community to take the necessary measures to protect the well-being of their population, until necessary determinations have been made that the products are safe for consumption. This may entail a comprehensive review of the operations/production systems in Brazil in general and the specific companies in particular. Thus, the requirement of a Regional Risk Analysis.
(Statement from the Caribbean Agricultural Health and Food Safety Agency - CAHFSA)
A Regional Project Team (RPT), established to develop a Regional Energy Efficiency Building Code (REEBC), among other mandates, will be launched in Kingston, Jamaica, next week.
The launch and the first face-to-face Working Meeting with the contracted consultant will be held 30-31 March, at the Jamaica Bureau of Standards. Nine Member States – Antigua and Barbuda, Barbados, The Bahamas, Belize, Guyana, Haiti, Jamaica, Saint Lucia, and Trinidad and Tobago – are represented on the RPT which consists of 19 Members.
The RPT is tasked with developing the REEBC, as well as its associated application documents and Minimum Energy Performance standards for buildings. To do so, the RPT will review the Minimum Energy Performance Standards for buildings as proposed by consultant, Solar Dynamics, in their final report of the consultancy on the Development of Minimum Energy Performance Standard (MEPS) for public and commercial buildings in CARICOM Member States. The team will also review the International Energy Conservation Code (IECC) in an effort to adapt it, where necessary, and present for acceptance and adoption by Member States as a Regional Energy Efficiency Building Code.
This development comes against the background of steps the Caribbean Community (CARICOM) has been taking to implement energy efficiency measures and renewable energy resources into their energy mix. The much-needed economic transformation, energy independence and security and the reduction of environmental effects from the combustion of fossil fuels, are expected to flow from the implementation of these measures.
In general, energy efficiency measures are highly cost-effective as investments and all stakeholders in the Region need to re-examine the way in which energy is used and to identify ways of using energy more efficiently. The energy intensity index in CARICOM is higher than the energy intensity index of the world and about two and a half times that of the European Union. A continued focus on energy efficiency practices can help mitigate the increase in the atmospheric temperatures and climatic changes over the years. The CARICOM Energy Strategy recommends a 33% reduction in energy intensity to be applied in all CARICOM Member States by 2027.
Improving the energy efficiency potential across sectors and economies is crucial for countries to deliver not only on climate objectives but to also improve their energy security, economic development and citizens’ health. Despite the benefits from energy efficiency, the current “low” oil prices pose a risk for the serious investment and application of more energy efficient mechanisms. Nevertheless, reducing the energy demand through improved energy efficiency makes renewable and non-renewable energy more affordable. In a world of finite resources; improvements in energy efficiency must be maximised.
Buildings account for over one-third of the world’s total energy use and associated Greenhouse Gas (GHG) emissions; more than half of the electricity produced is consumed by buildings. Typically, 10% to 20% (depending on building type) of the total life-cycle energy consumed is used for the manufacturing and assembly of building materials, construction, maintenance, refurbishing and demolition; 80% to 90% is used, over the life of the building, for heating, cooling, lighting and ventilation, house appliances, etc.
Recently therefore, there has been an increasing trend to promote supranational collaboration to develop international energy efficiency requirements or standards for buildings, such as, via the International Standards Organisation (ISO), International Energy Conservation Code (IECC), U.S. Green Building Council (USGBC), American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Building Research Establishment Environmental Assessment Method (BREEAM).
In the same manner, the CARICOM Secretariat and the CARICOM Regional Organisation for Standards and Quality (CROSQ) are seeking to develop an REEBC. This initiative is being supported by the Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH, through the Renewable Energy and Energy Efficiency Technical Assistance (REETA) Programme.
The REEBC is expected to address all of the aspects of energy use in buildings which comprise of, but are not limited to: thermal performance requirements for walls, roofs and windows; day lighting, lamps and luminaire performance; energy performance of chillers and air distribution systems; the electrical wiring system; solar water heating; appliances; renewable energy; zoning of buildings, climate classification and building energy management systems.
(Submitted by CARICOM Secretariat)
All eyes will be focussed on Antigua and Barbuda next week, when the 30th Council of the CARICOM Regional Organisation for Standards and Quality (CROSQ) meets for the close out of the 10th European Development Fund (EDF) Technical Barriers to Trade (TBT) Programme and Directors’ meeting.
The March 13 – 17th Council meeting is expected to attract more than 50 persons from the 15 CARICOM Member States, the Dominican Republic, and even as far away as Germany, as many international organisations and agencies affiliated with trade and the European Union-funded 10th EDF TBT programme arrive in the country for the meeting.
The first day will feature a Close out Seminar of the CARIFORUM 10th EDF-TBT Programme which began in 2012. The programme, which lasted for a period of five (5) years, and will conclude this month, and was centred around the building of the region’s capabilities in the several areas of quality infrastructure, and using these capabilities as a means of managing and reducing technical barriers to trade. Quality infrastructure (QI) refers to the development of standards for products and services; metrology - which is the science of measurements and its related infrastructure; accreditation, and conformity assessment - primarily the services of testing, inspection and certification.
The managers and implementers of the project, namely the German Metrology Institute (PTB), and CROSQ, along with the Dominican Institute for Quality (INDOCAL), will give a breakdown of the project, with discussions centred on the successes, challenges, and lessons learnt over the past five (5) years.
The Antigua and Barbuda Bureau of Standards (ABBS), which is serving as local hosts to the week of activities and meetings, will also use the occasion to launch the Antigua and Barbuda National Quality Awards Programme, which, once fully established, will recognise local producers and manufacturers of goods, as well as service providers who are and have introduced quality management and other quality-based systems and activities into their businesses.
“This is going to be a big occasion for Antigua and Barbuda to host an event of significant regional importance, and also to introduce to the public of our country the concept of creating a quality culture with the launch of this National Quality Awards. These Awards, which will be launched on the evening of March 13 will say to our businesses that we recognise the efforts to produce quality for our own consumption, as well as for export to the region and the rest of the globe.
“It is an initiative that was encouraged under the 10th EDF-TBT Programme, but one we thought important enough to introduce to our public and private sector here in Antigua and Barbuda. It will be a great celebration and achievement for all of us; and to have the rest of the region watching the unfolding of this Awards will be a tremendous boost for the country,” said Director of the ABBS, Mrs. Dianne Lalla-Rodrigues.
It was a sentiment shared by Chairman of CROSQ, Mr. Jose Trejo. He noted that the CROSQ Council of Directors was pleased to be hosted by the ABBS and the country of Antigua and Barbuda for the closing of the 10th EDF-TBT Programme which he noted had brought several notable improvements to the development of quality infrastructure in the region.
“We’ve seen advancements in equipment, physical infrastructure, skills of staff who have been trained in various areas and have participated in exercises to prove their competence over the period. I can say without contradiction that this programme has been a benefit to our region and has enabled us to form closer and greater ties with our colleagues across the region and further north to the Dominican Republic,” he said.
The Chairman said he was looking forward to the week of activities and to discussing with partners from the European Union, the CARIFORUM Directorate, as well as Germany and the Dominican Republic, the accomplishments that have been realised, as well as the valuable lessons learnt, which can be used for future developments in our quality infrastructure in the region;.
The 10th EDF-TBT Programme Close-out Seminar will take place on March 13, 2017 and will be followed by the meeting of the CROSQ Council, from Tuesday March 14, 2017 to Thursday March 16, 2017, where Directors and Executive Directors from National Standards Bodies across the CARICOM Region will look at arrangements for further developing QI across the region as well as other collaborative efforts for the year ahead.
About the 10th EDF-TBT Programme
The Technical Barriers to Trade (TBT) component of the 10th European Development Fund - Caribbean Regional Indicative Programme (EDF-CRIP), "Support to the Caribbean Forum of the ACP States in the implementation of the commitments undertaken under the Economic Partnership Agreement", is funded through a Financial Agreement between the European Union and CARIFORUM.
The overall objective of the 10th EDF Programme is to support the beneficial integration of the CARIFORUM states into the world economy, to support regional cooperation and the development efforts of the Caribbean, in an effort to meet the requirements under the current Economic Partnership Agreement (EPA) between the EU and CARIFORUM. The EPA-TBT component is expected to facilitate intra- and inter-regional trade as well as international competitiveness and sustainable production of goods and services within the CARIFORUM states for the enhancement of social and economic development.
It is implemented by CROSQ and the Dominican Institute for Quality (INDOCAL) in the Dominican Republic, and managed by the German Metrology Institute (PTB).
The hard work of developing Quality Infrastructure in the Caribbean is just starting to pay off.
That’s the view of quality expert, Mr. Pat Paladino, as he addressed a meeting of National Accreditation Focal Points (NAFP) officials from eight CARICOM countries in Barbados this week. The workshop is an initiative under the 10th EDF-TBT Programme, funded by the European Union and implemented by the CARICOM Regional Organisation for Standards & Quality (CROSQ), the German Metrology Institute (PTB) and the Dominican Institute for Quality (INDOCAL). It ends on Friday, February 17.
Mr. Paladino is one of the trainers at the workshop, which is led by Mrs. Claudette Brown – Accreditation consultant and trainer.
Mr. Paladino noted that the global market was moving ahead in areas requiring product tested by labs accredited by an accreditation body that is a signatory to international accreditation agreements. Failure to meet the international requirements could result in a close out for products of the Caribbean, he noted.
“Developed markets set the rules and they’ve embraced the international accreditation system. If the Caribbean can’t meet these rules, our businesses and exporters are not going to be able to do business in these markets. Also, if the region is unable to provide recognized accreditation and conformity assessment services, then businesses and manufacturers will have to look outside the region to be able to have their products tested.
“Typically, businesses would have to go to the US, Canada or Europe and the cost of testing in these countries is probably 10 or 20 times the cost of doing it here, if we had the capabilities. That’s pretty significant for these manufacturers,” he remarked.
The expert, who is a former President of the InterAmerican Accreditation Cooperation, the internationally recognised association of accreditation bodies in the Americas and other organisations interested in conformity assessment, said this was why the work of the CARICOM Regional Organisation for Standards and Quality (CROSQ) and the National Standards Bodies (NSBs) of the region was so important to mitigating some of the international risks.
“All the hard work is finally starting to pay off. There was a slow start getting people on board, knowledgeable and trained, but today we have an accreditation body that is already recognised internationally. We are also seeing a number of labs, both in the medical and testing area, come forward and attain accreditation. So, we are taking small steps, but the question is, are we moving fast enough,” he said.
Governments, he pointed out, must be made to understand why these processes are so important to national and regional development. Standards development organisation must adopt or adapt international standards as national standards to support businesses and export.
Mrs Brown’s indicated that participants would be reviewing the requirements of the ISO/IEC 17025 standard. She pointed out that this standard was applicable to all laboratories and can be used by the NAFPs to assist these labs in the development of their management systems for quality, administrative and technical operations. She pointed out that the workshop would also be covering other supporting information, including the benefits of accreditation, the accreditation process and assessor attributes. The participants were encouraged to participate fully in the activities of the week in order to maximize the benefits.
CROSQ’s Technical Officer – Accreditation, Mr. Stephen Farquharson explained that the role of the NAFP was to assist Conformity Assessment Bodies (CABs) with their quest for international accreditation to meet the needs of businesses. He told the officials from Bahamas, Belize, Dominica, Guyana, Haiti, Montserrat, St. Kitts and Nevis and Suriname that the week-long training would give them the basics needed to provide the necessary assistance to CABs, and especially laboratories.